How To Set A Timex Triathlon Watch

Download Article

Download Article

The Timex Expedition is a type of digital, outdoor lookout man that features a stopwatch, warning clock, and timer. There are twenty-iv different types of Timex Expedition watches, but they are all set in a very similar way. Setting your Timex Expedition is washed by pressing a serial of push combinations on the spotter itself.

1. 1

   Enter time fashion. Press the Mode push button until you lot enter Time mode. The Manner button is located on the lower left side of the watch face. If you're in the stopwatch or alarm mode you won't be able to set up the time. Keep pressing mode until the 4 numbers indicating the time of day bear witness upwardly. ^[1]

   • The time you lot see in Time Mode may not exist correct – yous are trying to set your watch after all. However, you lot can ensure that it is time mode past checking to meet if there are seconds ticking by on the correct hand side of the lookout man.

2. 2

   Press Ready. Press and concur the Set push until "Time Zone" flashes on-screen. The Set up button is located at the top left side of the watch face.

   • At this point you lot'll also be able to choose if yous're in daylight savings time or non. Cull accordingly.

   Advertizement

3. 3

   Select your time zone. Press either the Plus or Minus buttons to select your electric current fourth dimension zone. The Plus and Minus buttons are located at the acme and lesser of the right side of the spotter face^[2] , respectively.

4. 4

   Set the correct hour. Press the Manner button and the "hour" digits will begin flashing on-screen. At present press either the Plus or Minus button to select the right hour of the day.

5. 5

   Ready the correct minutes and seconds. Once you've set up the 60 minutes correctly printing the Manner push button. You'll detect that the "minute" digits will brainstorm flashing on-screen now. Press the Plus or Minus button to select the correct time in minutes. ^[3]

   • If you want to be actually verbal you can press the Fashion button again to set up the seconds exactly. One time you press mode the "seconds" digits will begin flashing simply like everything else has. Press the Plus or Minus button to set up the seconds to goose egg or to match them up with another clock.

6. 6

   Prepare the month and appointment. Printing the Mode button once you're done setting the seconds if you want to set the month and date. The solar day of week will begin flashing. Set that, press Mode once more, and the month will start flashing. ^[iv] Printing Mode one more time and the year volition start flashing.

   • Be careful not to press Fashion besides many times or might skip a stride. If that happens you'll have to pass through all the previous instructions again.

7. 7

   Printing the Set button to finish setting your spotter. In one case you lot have pressed the Fix button yous'll be returned to

   • You tin can press the Set button at any fourth dimension if you don't want to ready the seconds, month, or date. ^[5]

Advertisement

1. 1

   Locate the crown on your analog expedition watch. To set the time and engagement of your analog expedition watch you will first demand to locate the crown. The crown will appear as a small circular disc on the border of your watch. You will be pulling this disc out and away from the body of the watch to prepare both the time and engagement.

   • Pulling the crown all the mode out volition allow you to conform the time.
   • Pulling the crown half way out to the middle position will allow you lot to adjust the date.
   • Pushing the crown dorsum in will restart the watch, starting from the time and date you lot have set it to.

2. 2

   Fix your picket to the right time. Once you've located the crown you can use it to suit the time. Using the crown to accommodate the fourth dimension is a simple procedure that involves pulling it out fully and twisting it until the hands of the sentry are at the right time. Follow these steps to prepare your watch using the crown:

   • Pull the crown out to its outer position, pulling every bit far as it will extend.
   • Once extended yous can twist the crown to adapt where the artillery of the sentry are positioned.
   • Twist the crown until the arms are set to the right time.
   • Button the crown dorsum downwardly into the watch to kickoff information technology up over again.

3. 3

   Gear up the date and day on your watch. To set the engagement and day on your scout yous volition need to first observe the crown. The crown volition need to be pulled out and away from the scout and so twisted until the right engagement is shown. Follow these few steps to utilize the crown when setting the date:

   • Find the crown and pull it out of the watch to the center position. This will be half of its length.
   • Turn the crown clockwise until you see the correct date.
   • If the date isn't changing, pull the crown to the outer position and turn alee by 24 hours.
   • Put the crown back into its neutral position, fully pressed down into the watch.

Ad

Add New Question

• Question

  How do I set the stopwatch?

  

  For the archetype hand stopwatch yous have to printing the button at the top. For digital watches click the mode button. For most smartphone devices become to the clock awarding, find the stopwatch, and click first.

• Question

  How tin I ready my Timex Trek watch to brandish time 2 instead of fourth dimension i?

  

  Printing Start/Dissever button to bike through time zones. Concord Start/Split button for five seconds to switch to the fourth dimension zone desired.

Ask a Question

200 characters left

Include your email accost to get a message when this question is answered.

Submit

Advertising

Thanks for submitting a tip for review!

About This Article

Commodity Summary X

To set a Timex Expedition, first press the Way button on the lower left side of the watch face until you enter Time mode. Printing and hold the Prepare button, which is at the tiptop left of the watch face, until "Fourth dimension Zone" flashes on-screen. Select your current time zone past pressing the Plus or Minus buttons, which are at the top and bottom of the right side of the watch. Striking the Manner push button and the "60 minutes" digits will begin flashing on-screen. Now printing the Plus or Minus button to select the correct hour. Once yous've set the hour correctly, printing the Mode push, which will make the "minute" digits flash. Use the Plus or Minus button to select the right time. To larn how to ready the month and engagement on your Timex Trek, go along reading!

Did this summary assistance you?

Thanks to all authors for creating a folio that has been read 176,388 times.

Did this commodity help yous?

Source: https://www.wikihow.com/Set-a-Timex-Expedition

Share this post