How To Set Intermatic Timer

Download Commodity

Download Commodity

An Intermatic timer is a timer that you can install in your home and connect to anything with a power source, such as lights, to program them to plow on and off at certain times of twenty-four hour period. The 2 types of Intermatic timers are analog and digital. They are both easy to set up, as long as you make sure to follow the steps and fix the correct times.

1. 1

   Open up up the door on the timer'south enclosure. You don't need any tools to open the enclosure. Apply your hands to pry open up the door on the grey box that encloses the timer.^[1]

   • This applies to Intermatic Mechanical Time Switch models with an all-metallic construction.

2. 2

   Rotate the clock so that the large arrow points to the electric current fourth dimension. Turn the yellow clock dial clockwise with your hand until the large arrow facing downwardly points at the electric current time. It's of import to prepare this time as accurately every bit possible so that the timer works at the exact times you want it to.^[2]

   • The dial just turns clockwise, and then if you laissez passer the correct time just keep turning it until you get at that place again.
   • Each line between numbers on the clock represents an interval of xx minutes.
   • Don't always unscrew the pointer for the current time or you will throw off the timer.

   Advertisement

3. 3

   Loosen the "on" and "off" arrows with your fingers or pliers. Plough the knobs on the arrows to the left to loosen them. Use a gear up of pliers to get them started if they are as well tight to loosen with your fingers.^[iii]

   • These are the arrows yous volition set up at the times you want the timer to turn something on and off.

4. 4

   Slide the "on" and "off" arrows to the times you desire them set at. Slide the pointer that says "on" to the time yous want the timer to plow something on at. Slide the "off" arrow to the time y'all want it to turn off at.^[four]

   • If you want your timer to plough your lights on at dawn and dusk, and then do a quick Cyberspace search for the dawn and dusk times in your surface area and set the arrows to those.

5. 5

   Tighten the knobs on the "on" and "off" arrows with your fingers. Screw the arrows in place equally tight as you tin with your fingers. Use pliers to tighten them all the manner if they still slide after you tighten the knobs with your fingers.^[v]

Advertisement

1. 1

   Printing and hold the "on/off" push and press the reset button with a paperclip. Flip open the door that covers the buttons then hold the "on/off" button as yous press the reset button in with a paperclip for 3 seconds. Keep holding the "on/off" button for another 3 seconds.^[6]

   • This will clear the timer's retentiveness and let you program it from the beginning.

2. 2

   Printing the "mode" push button until the screen shows "setup", then press "on/off". This will enter the setup bill of fare. From hither you will begin to set the current hour.^[7]

   • You should see the hour flashing on the digital display at this point.

3. three

   Set the current hour and minutes. Use the plus and minus keys to set the current hour, then hitting the "on/off" push button. Set the electric current minutes with the plus and minus keys, followed past the "on/off" push.^[8]

   • Brand sure to pay attending to whether the time you lot are setting is AM or PM.

4. 4

   Set the electric current year, month, and engagement. Use the plus key to set the current year, then printing "on/off" to move on. Do the same for the month and date.^[ix]

   • You can agree down the plus or minus keys to change the numbers a scrap faster.
   • When you are done with this, you volition come across a twenty-four hour period of the week displayed. If the twenty-four hours is wrong, and then you may have set the date wrong and you will have to repeat the steps. If the twenty-four hour period is right, hit "on/off" to move on.

5. v

   Select transmission or motorcar daylight savings and your zone. Leave the daylight savings setting on car if you use daylight savings in your area. Alter it to transmission if you do not use daylight savings. Refer to the map in the instructions to see which zone yous autumn into and fix the correct ane.^[10]

   • E'er utilise the "on/off" button to move on to the adjacent department of the programming.

6. 6

   Accommodate the dawn and dusk times every bit needed. The next hr you will see is the timer's estimated dawn time for your expanse. Arrange it if it is off, then move on to the dusk time and practise the same.^[xi]

   • These are the times that the timer will follow to plough on and off.
   • This is the terminate of the basic setup and you will be taken dorsum to the beginning of the setup screen when you are washed.

7. 7

   Press the "mode" push until information technology displays "PGM", and then striking "on/off". This will have yous into the programme menu so you tin set up the timer'south on and off events. The timer is automatically set to plough on at dusk and off at dawn every day of the week. Change these settings if you want, or leave them the same if this works for you.^[12]

   • When you lot are happy with the settings, simply printing "mode" again to put the timer back in "Car" style and close the embrace over the buttons.

Advertising

Ask a Question

200 characters left

Include your email address to get a bulletin when this question is answered.

Submit

Advertisement

Thanks for submitting a tip for review!

Virtually This Article

Thank you to all authors for creating a page that has been read 25,233 times.

Did this article help you?

Source: https://www.wikihow.com/Set-an-Intermatic-Timer

Share this post